Free tool
Dump truck hauling calculator
How many trucks keep the excavator busy, how many loads the job is, and how long the hauling takes.
Cycle = load + drive + dump. Trips per hour = working minutes / cycle. Yd³ per truck-hour = truck yd³ x trips. Trucks = excavator yd³ per hour / yd³ per truck-hour, rounded up. Loads = bank yd³ x (1 + swell %) / truck yd³, rounded up.
An estimate from yards and minutes. It does not check weight: wet or heavy dirt can max out a truck's legal payload before it is full, so check the truck's rating and weigh a load.
More free calculators:
When to use it
Use it when you are bidding hauling, setting up a dig day or checking that you are not paying trucks to sit, and you need to know how many trucks, how many loads and how many hours.
How to measure on site
- Get the yards to haul in the ground (bank yards), and the loose yards per hour the excavator puts out. The excavator production calculator gives you both.
- Ask the trucker what a truck carries in loose yards.
- Time one trip: minutes to load, minutes driving there and back, and minutes to dump and turn around.
- Loose yards: 500 x (1 + 25%) = 625 yd³, which is 53 loads of 12 yd³.
- Truck cycle: 3 load + 24 round trip + 3 dump = 30 minutes.
- Trips per truck per hour: 50 / 30 = 1.7, so 20 yd³ per truck per hour.
- Trucks needed: 120 / 20 = 6, rounded up to 6.
- Hauled at 120 yd³ per hour, that is 5.2 hours.
Common questions
Divide the excavator's loose yards per hour by the yards one truck can move in an hour, and round up. A truck's hour is its load size times the trips it makes, and the trips come from working minutes in the hour divided by the cycle: loading, driving there and back, and dumping.
Four things: the time to load at the dig, the drive to the dump, the dump and turnaround, and the drive back. The tool takes load time, round trip drive time and dump time as separate boxes. Time a real trip with your phone and use that rather than a guess.
Take the bank yards, multiply by 1 plus the swell to get loose yards, then divide by the loose capacity of one truck and round up. Trucks are sold by loose capacity, so confirm the number with the trucker. Always check the legal weight too, because wet or heavy dirt can max out a truck before it is full.
Then the digger waits on trucks and the haul rate drops to what your trucks can carry. Multiply the yards one truck moves in an hour by the number of trucks you have, and divide the total loose yards by that to see the hours.
Hours are the loose yards divided by the yards hauled per hour. With the number of trucks rounded up, hauling keeps pace with the digger, so the digger sets the pace. The tool shows the hours at that pace.
No. It works from yards. Dirt weight changes with the soil and how wet it is, and legal payload depends on the truck and the state, so check your truck's rating and weigh a load before you rely on the yard count.
TrackOver keeps the estimate, the materials, the crew schedule and the job photos in one place, from the first quote to the final invoice.
Try TrackOver free7-day free trial, no card needed. See it in 2 minutes
Start your trial with your trade set up:
Want the details first? See how TrackOver runs the job for Excavation, Grading & Clearing and Trucking & Hauling.