Skip to content

Getting on a GC's bid list: the prequalification packet for excavation subs

November 16, 2026 · 6 minute read · TrackOver

What general contractors ask excavation subs for before adding them to a bid list, how to keep a prequal packet ready, and how to follow up on bids.

A lot of commercial work never shows up on a public board. It goes out as an invitation to bid, from a GC's estimator to the subs already on their list. If your company is not on that list, you do not lose the bid. You never see it.

Getting on the list usually means getting through prequalification: a packet of paperwork that tells the GC who you are, whether you are insured, whether you work safely, and whether you can handle the size of job they send out. None of it is hard. It just takes longer than you expect the first time, and the estimator is not going to wait while you hunt for your injury logs.

What does a GC ask for in a prequalification packet?

Every GC has its own form, and bigger ones use online prequalification portals. The questions tend to cover the same ground. Here is what typically shows up for an excavation or utility sub.

  • W-9. Your legal business name, tax ID, and entity type. Make sure the name matches your insurance and your invoices exactly, or accounting will kick it back.
  • Certificate of insurance. General liability, auto, workers' comp, and often umbrella coverage, with the limits you carry. Many GCs also ask to be named as additional insured, sometimes with specific endorsement wording. Send their insurance requirements to your agent and let the agent tell you what your policy can do and what it would cost to add.
  • Safety program. A written program, not a promise. Expect questions about who your competent person is for excavations, how you train new hires, and whether you hold regular toolbox talks.
  • EMR. Your workers' comp experience modification rate, often for the last three years. Your insurance agent can get you the letter or worksheet that shows it.
  • OSHA logs. Many GCs ask for your injury and illness summaries for recent years, or for the rates calculated from them. Depending on your size and industry, you may not be required to keep the logs. If that is you, say so plainly rather than leaving the box blank.
  • References. Other GCs you have worked for, owners, and sometimes your main suppliers.
  • Equipment list. What you own, what size, and what you rent when you need it.
  • Bonding capacity. On larger work, the GC may want to know whether you can provide performance and payment bonds, and up to what size. That answer comes from your surety, through your bonding agent.
  • Licenses and registrations. Where your state or town requires a contractor license or registration, a copy of it.

Not every GC asks for all of it. A small builder might want only a W-9 and a COI.

Build the packet once and keep it ready

The subs who get onto lists fastest are the ones who can answer a prequalification request the same day. That means building a folder once and keeping it current, instead of starting from scratch every time a new GC calls.

  1. One folder, one place. Digital, backed up, and reachable from your phone.
  2. A one-page company summary. Who you are, what work you do, the area you cover, crew size, main equipment, and who to call. This page gets read more than anything else in the packet.
  3. The standard documents. W-9, a current sample COI, your written safety program, EMR letter, injury summaries, license copies, and the equipment list.
  4. A reference list. Names, companies, phone numbers, and the job you did for each one.
  5. Photos of finished work. A handful of clean shots, especially finished grade and utility work before backfill.

Put a date on the calendar to refresh it. Insurance renews, the EMR updates, equipment changes, and a packet with last year's COI in it looks like a company that does not keep track of things.

Filling out the GC's own form

Even with a ready packet, most GCs want their own form filled out too. A few habits help:

  • Answer every question. Write "none" or "not applicable" instead of leaving it blank. Blanks look like hiding.
  • Be accurate about size. Do not claim a crew or a job size you cannot back up. A GC who puts you on work too big for you will remember it.
  • Be clear about scope. Say what you do and what you do not: mass grading, utilities, erosion control, trucking, demolition. The estimator will send you invitations that match.
  • Explain the bad years. If you had a serious claim or a high EMR, a short, honest note about what happened and what you changed reads better than silence.

Responding to invitations to bid

Once you are on the list, invitations start coming. How you handle them decides whether you stay on it.

  • Answer every one. If you are bidding, say so. If you are not, say that too, quickly and politely. Estimators notice who responds, and a sub who goes quiet tends to stop getting invitations.
  • Read the documents before you price. Plans, specs, addenda, and the GC's subcontract form, so there are no surprises after you win. Our checklist on what to get in writing before you mobilize covers the terms to look for.
  • Price it honestly. Our guide on how to bid excavation work covers production and cost, and our piece on overhead and markup covers what goes on top.
  • Write clear inclusions and exclusions. A GC comparing three dirt numbers will look at what each one covers. Make yours easy to compare.

Following up without being a pest

After the bid date, a short call or email to the estimator is fair: did they get your number, do they have questions, and when do they expect to award. If you did not get the job, ask where you landed. Many estimators will tell you whether you were close or way off.

Between bids, stay in touch in small ways. Send an updated COI when yours renews, without being asked. Let them know when you add a machine or a new kind of work.

And when you do win one, the work itself becomes the best prequalification document you have. Show up when you said you would, keep the site clean, keep the paperwork moving, and the next invitation is a lot easier to get.

Where to start if you have never done this

Make a list of the GCs building the kind of work you want in your area. Call each one and ask who handles subcontractor prequalification and how to get on their bid list for sitework. Some will send a form, some will point you to a portal, and some will just ask for your packet. Having it ready turns that call into a same-day reply.

TrackOver has a work board where excavation subs can post a free crew profile listing their equipment and whether they can send a COI, so GCs can find them. Inside the app, toolbox talks are logged with the date, job, and who attended, which is the kind of record a safety question on a prequal form is asking about. If that would help, try TrackOver free.

Common questions

How do I get on a general contractor's bid list? Call the GCs building the work you want and ask who handles subcontractor prequalification. Most will send a form or point you to an online portal. Fill it out completely, send your packet quickly, and then answer every invitation to bid that comes, even when you pass.

What documents are in a subcontractor prequalification packet? Typically a W-9, a certificate of insurance, a written safety program, your EMR, OSHA injury summaries, references, an equipment list, license copies where required, and on larger work, information about your bonding capacity.

What is additional insured status? An endorsement on your policy that extends some of your coverage to the GC or owner for claims arising from your work. GCs often require it with specific wording, so send their requirements to your insurance agent before you agree to them.

Do small excavation contractors need bonding to get on a bid list? Not always. Much private work does not require bonds, but larger private jobs and public work often do. If you want that work, talk to a bonding agent early, since a surety will want to see your financials and history before setting a limit.

Keep reading
Quote it, win it, and see if it paid

Build the estimate from your own prices, send it, and compare it to what the job really cost.

  • No card to start
  • Cancel any time, no contract
  • Export your data whenever you want

Running this kind of work? See General contractor software or the plans and the free tier, or find your trade.

Built for: