Sewer lateral
What does a sewer lateral replacement involve?
A sewer lateral is the pipe from the house to the sewer main. A replacement is usually: locate and mark, find out who owns which section, pull the permit, dig or bore, lay and bed the new pipe, inspect, backfill, restore. Permits and inspections are set by your town or sewer authority, so call them first.
The steps below are the usual order of the work. The rules around them are local, and they change from town to town.
The job, in order
- Find the line. Camera the old pipe if you can, and note where it runs, where it ties in, and where the cleanout is.
- Call 811. Wait for marks before any digging. See what happens when you call.
- Pull the permit. Ask the town or sewer authority what the job needs (see below).
- Open the ground or bore. Pothole at crossings. See potholing and daylighting.
- Lay the new pipe. Grade, bedding and joints per the local spec. See pipe bedding.
- Inspection. Leave the trench open until the inspector has seen it, if your town requires that.
- Backfill and restore. Photograph before you close it. See as-built photos before backfill.
Permits and inspections: ask your town
Don't assume. Two examples show how different it can be. In Alameda, California, the owner handles the upper lateral on private property and the city handles the lower lateral from the property line to the main. A building permit is required for ground plumbing repairs and replacements, and an encroachment permit comes in if a cleanout goes in the sidewalk or parkway strip. In Seattle, the page says an owner owns the side sewer to the public sewer main, and repairs go through a side sewer permit.
So before you quote, ask: who owns which section, what permits the job needs, whether work in the street or sidewalk needs its own permit, whether a cleanout at the property line is required, and who inspects and how you schedule it. Follow the local code and your inspector.
Pricing per linear foot
Most small crews price laterals per foot of pipe, then add the lump items: the tie-in, the cleanout, the permit, and restoring concrete or asphalt. Keep one price per foot for each method (open cut, bore) and soil, built from your own costs, and let the lump items sit as separate lines so a surprise doesn't hide in the footage.
TrackOver's price book lets you save items with a unit, such as feet, so a lateral line item carries your per-foot price into the estimate. You enter the footage, it does the math, and next job you start from the same numbers. See estimates and invoices.
Sources, checked 2026-11-15: City of Alameda, alamedaca.gov (Private Sewer Lateral); Seattle Public Utilities, seattle.gov/utilities (side sewers).