Pipe & conduit weight calculator

It depends on the outside diameter and the wall. Weight per foot equals the wall cross-section area times the material density, which for HDPE is about 59.6 lb per cubic foot. A 2 inch IPS (2.375 in OD) DR11 pipe runs about 0.6 lb per foot; a 4 inch DR11 is roughly 2.3 lb per foot. Enter your size and wall to get the exact number.

Dimension Ratio: the outside diameter divided by the wall thickness. A lower DR means a thicker wall and a higher pressure rating: DR9 is heavier-walled than DR11, which is heavier than DR17. Since wall equals OD divided by DR, the DR is all you need (with the OD) to get the weight.

Divide the reel's pipe weight by the weight per foot. If a coil weighs 1,200 lb of pipe and the pipe is 0.6 lb per foot, that is about 2,000 feet. Just be sure you are using the pipe weight, not the shipping weight: subtract the wooden reel or steel spool tare first, or you will read long.

Two reasons. Loading and hauling, since a few thousand feet of larger IPS pipe is real tonnage on the truck. And pullback, where the pipe's weight, buoyed by the drilling fluid in the hole, is a big part of the tension your rig has to overcome, so knowing weight per foot is the starting point for sizing the pull.

Yes. PVC is denser (about 87 lb per cubic foot versus 60 for HDPE), so for the same size and wall, PVC weighs roughly 45 percent more. Switch the material in the calculator to compare.