Splice sheets
A splice sheet lists every fiber in a closure: which cable and strand comes in, which goes out, and the loss reading. The office builds it on the web. The splicer reads it, and fills in what they spliced, on the phone at the handhole.
1. Office: make the closure
Owners and managers open UtilityOps and click the Splicing tab. Press New closure to add one, or open one that is already listed.
2. Office: open its sheet
On the closure's row, press Splice sheet. It shows fiber in to fiber out, tray by tray, with the strand colors worked out for you. Print sheet gives a clean page to print or save as PDF. Print splice book prints every closure, one per page.
3. Splicer: open it on the phone
In the app, open UtilityOps, then As-built Maps, and pick the design. Tap the closure on the map, then tap Splice sheet with the closure's name.
4. Splicer: record the work
Tap a fiber. Switch on Spliced today, type the Splice loss (dB), or pick Pass or Fail. By reading lets the loss number decide against your company's limit. Press the save button at the bottom when you are done (it reads Save and a count, like "Save 2 fibers").
5. No signal?
The sheet opens from the copy kept on the phone, and what you save waits on the phone and sends itself when signal is back. Owners, managers and crew can record. Subcontractor logins cannot open splice sheets.
Pro tip: Open the design once with signal before you drive out. That is what puts a copy of the sheets on your phone.