Skip to content

All help articles

Pull sheet and drop taps for a work packet

A work packet lists your part of a fiber build. The pull sheet tells you how much cable to cut for each drop tap, and which large handhole feeds it.

1. Open the packet

Open Work packets. On the phone, go to More, then Trade tools, then UtilityOps, then Work packets.

2. Tap Pull sheet

Open the packet and tap the Pull sheet tab.

3. Read each drop tap

On the web, each drop tap is listed under the large handhole (LHH) that feeds it, and its cable is cut from that LHH. Cut the Cable to cut length for each tap. On the phone, the Pull sheet shows the packet total, the number of taps and the feet.

4. Check the totals

The totals show the taps and feet for the packet. Keep your own count as you pull each tap, because the packet does not tick them off for you.

5. A tap is unconnected?

A tap listed as unconnected has no drawn run reaching it yet, so there is no footage to cut. Ask the office to check the design before you cut its cable.

Pro tip: The Pull sheet says there are no drop taps or structures? This packet has no taps yet, so check with the office.