Skip to content

All help articles

Do the daily equipment check

Check a machine before you run it. Answer PASS or FAIL on each item, or tap All pass when the machine is clean. A problem goes to the managers right away.

Open Equipment

1. Find the machine

On the phone, open More, then Equipment. Tap Inspect on the machine you are about to run. If a clock in sends you here, the check opens for you.

2. Pick Daily

Leave it on DAILY, or pick WEEKLY or PRE-TRIP if that is the check you were asked for.

3. Tap anything that is a problem

Tap PASS or FAIL on each item, or tap All pass if everything is fine. The check will not save until every item is answered. For each item you fail, write what is wrong and add a photo with Add photo. A photo is needed on every fail.

4. Take it out of service if it is unsafe

Once you fail an item, you can check Do not use this machine. Nobody can clock in on it until an owner or manager puts it back.

5. Save

Tap Save inspection. If you marked a problem, the button says Save and flag issues to managers. With no signal the phone saves it and sends it later.

Pro tip: Do the check before you start the engine. A defect you note today is a repair the office can book before the machine goes down.