Skip to content

All help articles

Work out yards and loads with Calculators

Calculators work out how many yards, tons, bags or truckloads of material you need from the size of the area. The math runs on the phone, so it works with no signal. Check it in the truck before you order.

1. Open Calculators

Tap More on the bottom bar. Type in Search the menu and pick Calculators. You can also scroll to it under More.

2. Pick the material

Along the top, tap the material you are ordering: Dirt, Topsoil, Gravel, Sand, Mulch, Asphalt or Concrete. Each one has its own depth to start from. Where a material has types, like fill dirt or pea gravel, pick the type just under the size boxes so the tons are right.

3. Type the size

Type the Length (ft), Width (ft) and Depth (in). The answer across the top changes as you type, so you can see it while you measure.

4. Read the answer

The top row shows cubic yards first. Dirt, topsoil, gravel, sand and asphalt also show tons. Dirt, topsoil, gravel and sand show loads too, based on your Truck capacity (yd³), which starts at 16. Change it to match your truck. Mulch and concrete show bags.

5. Start over

Tap Clear to empty the fields and go back to the starting depth.

Pro tip: The weights are common approximations. Confirm with your supplier before you order, and check your truck capacity so the load count is right for your truck.