Skip to content
Free tool

Crushed limestone calculator

Tons, yards, and truckloads for #57 stone, dense grade, and driveway limestone. Driveways usually run 4 inches of dense-grade base with 2 to 3 inches of #57 on top.

To work out how much limestone you need, multiply length by width by depth in feet and divide by 27: that is cubic yards. Limestone runs roughly 1.32 tons per cubic yard as a common approximation (#57 stone (clean, 3/4") at about 2,650 lb per cubic yard), and moisture and mix move that, so confirm with your supplier. Order about 10 percent over the calculated number for compaction, spillage and uneven grade.

2.47
cubic yards
3.3
tons (approx.)
1
truckloads at 16 yd³

Pro habit: Order about 2.7 yd³; dense grade locks in tight when compacted, and #57 scatters into low spots as it is spread.

Quarries usually sell limestone by the ton, so use the tons figure when you call and confirm their conversion since screenings weigh more than clean stone. Weights are common industry approximations; confirm with your supplier before ordering.

Worth knowing before you order

The number above assumes a few things about how this material behaves in the ground.

More free calculators:

DirtMulchGravelSandAsphaltTopsoilConcreteFill DirtRiprapPaver BaseTrenchFrench DrainPond Dig
Doing this for a living?

TrackOver runs dirt-work companies: jobs, crews, stamped site photos, machine hours, and billing in one place. Built inside a working excavation company.

Find your tradeSee a demo
Pricing a job with this?
TrackOver turns it into the estimate, the schedule and the invoice. 7-day free trial, no card needed.
Try TrackOver free

Common questions

How do I calculate how much limestone I need?

Multiply length by width by depth in feet, then divide by 27 to get cubic yards. This limestone calculator does it for you: enter length and width in feet and depth in inches, and it returns cubic yards, estimated tons, and truckloads. Add about 10 percent for compaction, spillage, and uneven grade.

How many tons is a cubic yard of limestone?

Limestone runs roughly 1.32 tons per cubic yard as a common industry approximation (#57 stone (clean, 3/4") at about 2,650 lb/yd³). Moisture and material change this, so confirm the exact conversion with your supplier.

Is this limestone calculator free?

Yes. It is a free tool from TrackOver, software built inside a working excavation company for contractors who move dirt. No signup required to use it.

Keeping this on paper?

TrackOver keeps the job, the photos, the hours and the invoice in one place, on the office screen and every crew phone.

Try TrackOver free

7-day free trial, no card needed. See how it works

See how TrackOver runs the job for: